GA-216 Final Exam Please sign up for the course before taking this exam. Which I-Code references GA-216 :1 The International Fire Code The International Residential Code The International Building Code Screws should penetrate through steel studs a minimum of:1 1/2” 1/4” 3/8” Wood studs must be how wide for the installation of gypsum panels:1 1.25” 1.5” 2” The edge of the board is :1 Paper bound. Factory or field cut. Nails should be driven such that:1 The nail head is slightly below the surface of the paper. The nail head is below the paper surface, puncturing it. The nail head is slightly raised. The following screws types can be used to attach gypsum panels to wood studs:1 Type W. Type S. Type W and type S. Type G. Type G and type S. The following minimum temperature must be maintained during mechanical gypsum panel installation:1 50˚F 32˚F 40˚F Gypsum panel joints may be no wider than:1 .125" .375" .25" Framing members receiving gypsum panels may be no wider than:1 16" o.c. 24" o.c. For single layer non-load bearing applications with nails and adhesive, screw spacing may be increased up to:1 24" o.c. 8" o.c. 16" o.c.